Active Plus + Nano Cartridge Set
- Complete set for the Fusion: Active Plus+ + Nano in one pack
- Full filter spectrum: pollutant filter + certified germ barrier
Active Plus+ & Nano replacement cartridge set
Fresh filtration performance for your Fusion
The set contains both filter stages of your Fusion or PRO Camper system: the Active Plus+ cartridge against pollutants, off-tastes and odours, and the Nano germ barrier (0.1 µm, certified to ASTM F838-15A).
Suitable for any use – camping or under-sink. The order is important: filtration runs from coarse to fine – Active Plus+ first, then Nano.
What is filtered?
The cartridge set filters in two stages: stage 1 (Active Plus+) binds odours, chlorine and dissolved pollutants and reduces limescale by approx. 4–6 °dH; stage 2 (Nano, 0.1 µm) retains germs and bacteria – certified to ASTM F838-15A.
Microorganisms (Nano)
The Nano cartridge focuses on filtering germs and bacteria in high concentrations, e.g. E. coli, Vibrio cholerae, Shigella, Salmonella.
Legionella (Nano)
The Nano cartridge reliably filters legionella out of tap water. Whether as a preventive measure or following a positive legionella test.
Chlorine and other substances affecting taste (Active Plus+)
The Bioton cartridge adsorbs unpleasant odours (chlorine, chlorinated hydrocarbons, CFCs and much more) and off-flavours in drinking water.
Pharmaceutical residues and pesticides (Active Plus+)
Organic compounds such as pesticides, herbicides, insecticides and pharmaceutical residues, as well as hormones and hormone-like substances, are reduced.
Heavy metals such as lead and copper (Active Plus+)
The adsorptive effect of the activated carbon binds and reduces heavy metals in drinking water.
Microplastics and other fine particles
The pores of the hollow-fiber membrane are about 700 times finer than a hair (0.1 µm) – microscopically small plastic particles and other particles can't get through.
What's included
- 1× Active Plus+ cartridge
- 1× Nano cartridge
Technical data
Technical data – Active Plus+
- Dimensions (H × W)
- 93 × 48 mm
- Weight
- 95 g
- Filter material
- Bioton
- Filter technology
- mechanical, adsorptive, catalytic + ion exchange
- Filter type
- Pollutant filter with germ barrier down to 0.7 µm
- Germ barrier
- 0.7 µm
- Replacement interval
- 4 months
- Capacity
- 3,000–5,000 l*
- Flow rate
- approx. 6 l/min**
- Water temperature
- up to approx. 45 °C
Flow rate Active Plus+
Flow rate at approx. 3 bar water pressure
Downloads
Technical data – Nano
- Dimensions (H × W)
- 95 × 47 mm
- Weight
- 55 g
- Filter material
- Hollow-fibre membrane (plastic)
- Filtration technology
- Mechanical filtration
- Filter type
- Germ filter
- Filtration fineness
- 0.1 µm
- Replacement interval
- 6 months
- Capacity
- 5,000–7,000 l*
- Flow rate
- approx. 11 l/min**
- Certification
- ASTM F838-15A
Nano flow rate
Flow rate at approx. 3 bar water pressure
* Capacity depends on the quality of the incoming water. ** Flow rate at approx. 3 bar water pressure; filter performance depends on the flow speed.
Installation
No tools required – only the order matters:
1Open the housing
Shut off the water supply and open both housing stages. Pull out the old cartridges with a twisting motion.
2Inserting & flushing the Active Plus+
Insert the new Active Plus+ cartridge and flush for approx. 20 seconds – the Nano must NOT be fitted yet, otherwise it may be damaged.
3Inserting the Nano
Insert the Nano cartridge into the second stage, close the housing – done.
Video instructions and PDFs: Installation help
Frequently asked questions
Why do the cartridges have different replacement intervals?
The Active Plus+ works by adsorption and is exhausted after approx. 4 months; the Nano filters purely mechanically and lasts approx. 6 months. With the set, you replace both together every 4–6 months – or you reorder the Active Plus+ separately.
In what order are the cartridges installed?
From coarse to fine: first Active Plus+ (first stage), then Nano (second stage). Optionally, the Protect pads can be placed in front as a coarse filter.
Does the set fit my PRO Camper?
Yes – the PRO Camper uses the same filter stages as the Fusion (two Element housings in series).
Is there anything to bear in mind when changing the cartridges?
Yes: first flush the Active Plus+ without the Nano fitted (approx. 20 seconds), and only then insert the Nano.