Active PFAS Cartridge
- Easy to install
- No tools needed
- Ready to use in seconds
Add to your order
Active PFAS drinking water cartridge
Filters pollutants – extra strong against PFAS
With its core of PFAS absorber resin, the Active PFAS filter cartridge filters not only long-chain PFAS but also the much smaller, short-chain PFAS compounds such as PFBS and PFBA.
In addition, the activated carbon shell reliably adsorbs unpleasant odours and stale off-flavours such as chlorine and chlorine degradation products. It also reduces organic pollutants, various pharmaceutical residues, light hydrocarbons, solvents, pesticides, aromas and fine particles (rust, limescale flakes, sand). Ideal for treating tap water in the kitchen.
What is filtered?
Active PFAS cartridge made of sintered activated carbon with PFAS absorber resin: the ion exchange resin binds long- and short-chain PFAS, while the activated carbon stage (5 µm) takes care of chlorine, off-flavours, microplastics and heavy metals.
PFAS – long- and short-chain
The ion exchange absorber resin reliably binds long- and short-chain forever chemicals such as PFBS and PFBA.
Chlorine and other off-flavours
The sintered coconut block activated carbon (5 µm) adsorbs unpleasant odours (chlorine, CHCs, CFCs and much more) and off-flavours in drinking water.
Microplastics and other fine particles
The pores of the activated carbon stage are around 14 times finer than a hair (5 µm) – microscopically small plastic particles and other particles are reliably trapped.
Pharmaceutical residues and pesticides
Organic compounds such as pesticides, herbicides, insecticides and pharmaceutical residues, as well as hormones and hormone-like substances, are reduced.
Heavy metals such as lead and copper
The adsorptive effect of the activated carbon binds and reduces heavy metals in drinking water.
PFAS absorber resin core
The ion exchange resin used to reduce long- and short-chain PFAS binds the contaminants like a magnet. The negatively charged PFAS ions are held in place by the positively charged anion resins, preventing them from being carried any further.
The patented RadiantFlow® technology ensures an even flow through the filter medium and delivers a high, reliable filtration effect throughout the entire working area of the granulate.
Binds odours and pollutants
The strong surface forces (adhesion) of the activated carbon remove unwanted cloudiness and odours such as chlorine from the water, as well as organic compounds and pollutants. These include pharmaceutical residues, hormones, pesticides/plant protection products, per- and polyfluoroalkyl substances (PFAS) and many more.
Retains microplastics
The activated carbon stage has pores of only 5 µm – around 14 times finer than a human hair. Microplastics, sand, rust and other particles are reliably trapped in them.
Development partner
Developed with instrAction® from Heidelberg
The absorber resin of the Active PFAS cartridge was created in close collaboration with instrAction® from Heidelberg, a specialist in innovative filter media. The P absorber resin was developed and tested for over ten years – Made in Germany.
- High selectivity for short- and long-chain PFAS
- Fast adsorption even at high flow rates
- Stable performance across the entire pH and temperature range
"The Active PFAS cartridge shows that our patented absorber resin can ensure highly effective PFAS retention to below the detection limit, even in compact systems such as the Alb Filter!"
Dr. Christian Meyer, Head of Production and Synthesis – instrAction®
PFAS filter solution – Made in Germany
The Active PFAS cartridge was developed in close collaboration with researchers from the Heidelberg-based company instrAction®.
The development focused on the targeted optimisation of a highly effective anion exchange resin and of the internal flow guidance. The patented RadiantFlow® technology ensures a controlled, even flow through the filter medium. As a result, a wide range of PFAS – both long-chain and short-chain compounds – can be effectively reduced to below the analytical detection limit in just one filtration step.
RadiantFlow® technology
Ensures a controlled, even flow
Tested to NSF-53.
Why filter PFAS?
PFAS (per- and polyfluoroalkyl substances) are a health concern for the human body for several reasons. PFAS are extremely persistent. PFAS accumulate in the body. PFAS are also regarded as forever chemicals.
The resulting health risks can be many and varied:
Damage to the immune system: High PFAS exposure can weaken the immune response and may make vaccinations less effective.
Liver and metabolic damage: PFAS are associated with liver damage and with disorders of fat and insulin metabolism.
Hormonal effects: PFAS can act as endocrine disruptors by influencing hormonal processes.
Reproduction and development: PFAS can affect fertility and hormone balance and impair the development of unborn babies and infants.
Increased cancer risk: Long-term studies suggest that certain PFAS (such as PFOA and PFOS) can increase the risk of kidney and testicular cancer.
Cardiovascular diseases: Recent research links a high PFAS concentration in the blood to an increased risk of cardiovascular disease.
Comparable cartridgesWhich cartridge is right for you? |  |  |  |  |
|---|---|---|---|---|
| Name | Active PFAS | Active | Active Plus+ | Nano |
| Filter type | Pollutant filter | Pollutant filter | Pollutant filter | Germ and bacteria filter |
| Filter material | PFAS-specific | Coconut activated carbon | Bioton | Hollow-fibre membrane |
| Odour, taste, chlorine | ||||
| Heavy metals | ||||
| Pesticides, pharmaceutical residues | ||||
| Microplastics, sediments | ||||
| Forever chemicals (PFAS) | ||||
| Germs and bacteria | ||||
| Limescale reduction | ||||
| Replacement interval | every 4 months | every 4 months | every 4 months | every 6 months |
| Flow rate (at approx. 3 bar) | ~6 l/min | ~7 l/min | ~6 l/min | ~11 l/min |
| CHF 49.90 | CHF 25.90 | CHF 35.90 | CHF 59.90 | |
| Buy | Buy | Buy | Buy |
- Strong reduction
- Significant reduction
- Partial reduction
- Not filtered
What's included
- 1× Alb Filter Active PFAS filter cartridge
Technical data
Technical data – Active PFAS
- Dimensions (H × W)
- 102 × 56 mm
- Weight
- 115 g
- Filter material
- sintered activated carbon + PFAS absorber resin
- Filter technology
- mechanical, adsorptive, catalytic + ion exchange
- Filter type
- pollutant filter with a focus on PFAS
- Activated carbon pore size
- 5 µm (0.005 mm)
- Technology
- RadiantFlow®
- Replacement interval
- 4 months
- Capacity
- 3,000–5,000 l*
- Flow rate
- approx. 6 l/min**
Flow rate
Flow rate at approx. 3 bar water pressure
* Capacity depends on the quality of the incoming water. ** Flow rate at approx. 3 bar water pressure; filter performance depends on the flow speed.
Installation
No tools needed – here's how to change the cartridge depending on the housing type:
1Changing Element & Duo cartridges
Shut off the water supply → unscrew the cap → twist and pull out the old cartridge → push in the new cartridge → screw the cap back on.
2Changing Fusion cartridges
Shut off the water supply → open both housing stages → change the cartridges. Important: only insert the Nano cartridge AFTER the new Active cartridge has been flushed.
3Activate & flush
Turn on the water and let it run for approx. 20 seconds until the fine activated carbon dust has been flushed out.
Video instructions and PDFs: Installation help
Frequently asked questions
How can I tell when the cartridge needs changing?
At the latest once the replacement interval is up – even if the water still tastes good, filter performance declines after that. A noticeably reduced flow rate is an additional sign.
What are PFAS – and why a dedicated filter?
PFAS (“forever chemicals”) are extremely stable industrial chemicals that accumulate in water and in the body. Conventional activated carbon can only capture them to a limited extent – which is why the cartridge combines activated carbon with a specialised absorber resin for long-chain and short-chain PFAS such as PFBS and PFBA.
How do I dispose of the old cartridge?
With your general waste. Active cartridges consist largely of coconut activated carbon – a renewable raw material.
Does the new cartridge need to be activated?
Yes, simply let water run through for approx. 20 seconds to flush out fine activated carbon dust. With Fusion: flush the Active first, then insert the Nano.
Customer reviews
Genuine buyer reviews – invited after purchase, independently collected and published by REVIEWS.io.
-
Christine Verified buyer
Reliable delivery, great via the subscription, that way I never miss a date for changing the cartridge. Thanks
Translated from GermanTranslated from German · Show originalHide original
Lieferung zuverlässig, super über das Abo , so verpasse ich keinen Termin beim Wechseln der Kartusche.Danke
-
Katharina Verified buyer
Good feeling, for better, tasty, non-toxic water
Translated from GermanTranslated from German · Show originalHide original
Gutes Gefühl, für besseres schmackhaftes ungiftiges Wasser
-
Gerd Verified buyer
Easy to change
Translated from GermanTranslated from German · Show originalHide original
Leicht zu tauschen
-
Bernhard Verified buyer
Unfortunately I can't give a verdict on this filter yet because it isn't installed yet, but I think it will be just the same as with the Active water filter
Translated from GermanTranslated from German · Show originalHide original
Zu diesem Filter kann ich leider noch kein Urteil sagen weil noch nicht verbaut denke aber es wird genau so sein wie bei den Active Wasserfilter
-
Wolf-Rüdiger Verified buyer
Fast delivery, good quality
Translated from GermanTranslated from German · Show originalHide original
Schnelle Lieferung, gute Qualität
-
Uwe Verified buyer
I've had the filter system for several years now and am very satisfied with it. Easy to handle.
Translated from GermanTranslated from German · Show originalHide original
Habe das Filtersystem schon mehrere Jahre und bin damit sehr zufrieden. Einfache Handhabung.
-
Ulrike Verified buyer
A whole class better again than the active + filter so far
Translated from GermanTranslated from German · Show originalHide original
Noch mal eine ganze Klasse besser als bisher der Filter active +
-
Anonym Verified buyer
Very satisfied and it reassures me to be protected.
Translated from GermanTranslated from German · Show originalHide original
Bin sehr zufrieden und es beruhigt mich geschützt zu sein.
-
Andrea Verified buyer
I've been very satisfied with the Alb filters for years, I can only recommend them.
Translated from GermanTranslated from German · Show originalHide original
Ich bin seit Jahren sehr zufrieden über die Alb-Filtern, ich kann es nur weiterempfehlen.
-
Anonym Verified buyer
Function can't be verified.
Translated from GermanTranslated from German · Show originalHide original
Funktion nicht nachvollziehbar.
-
Marie Verified buyer
Super fast delivery, the filter was here within a day. We previously had a simple Active filter and now want to get the PFAS out of the water as well, as there's a lot of industry nearby and we're afraid of corresponding contamination in the water
Translated from GermanTranslated from German · Show originalHide original
Super schnelle Lieferung in einem Tag war der Filter schon da. Wir hatten vorher einen einfachen Active Filter und wollen nun zusätzlich das PFAS aus dem Wasser haben, da hier in der nähe sehr viel Industrie ist und wir Angst vor entsprechenden Belastungen im Wasser haben
-
Constantin Verified buyer
I bought the cartridge as a spare. The PFAS cartridge fits perfectly into our existing Duo tap filter. Price ok for the performance offered.
Translated from GermanTranslated from German · Show originalHide original
Kartusche habe ich auf Ersatz gekauft. Die PFAS-Kartusche passt perfekt in unseren bestehenden Duo Wasserhanfilter. Preis ok für die gebotene Leistung.
No reviews with this star rating have been loaded on this page — ‘Show all 15 reviews’ opens the full list.